B&C Speakers 18 TBX 100
Estimated Shipping Widget will be displayed here!
Essential Information About the B&C 18TBX100 Subwoofer Speaker
Essential Information About the B&C 18TBX100 Subwoofer Speaker
- High Power Reserve : 2400W AES at 8 Ohms, designed to handle high power in subwoofer applications.
- Deep and Controlled Bass : frequency response rated from 35Hz to 1kHz, with a recommended tuning at 34Hz.
- Robust Tour-Ready Design : 4.0" (100mm) copper wire voice coil, ferrite magnet, double silicon spider.
- Reliability in Real Conditions : radial cone with waterproof treatment front and back, triple roll suspension.
Manufacturer Information
B&C Speakers
------------------------
Safety manager:
MSC Distribution
Email: infos@msc-distribution.com
Address:
An 18" Driver Tailored for High-Power Modern Subwoofer Cabinets
The B&C 18TBX100 belongs to the family of 18" drivers dedicated to sound reinforcement, where generous bass, strong mechanical durability, and stability at high levels are expected. This type of transducer is typically chosen to serve as a "motor" subwoofer within a system, capable of supporting long performances (clubs, events, fixed installations) while maintaining a coherent response in the low-frequency spectrum.
With its recommended enclosure and tuning, this model clearly aims for optimized integration in a speaker cabinet, favoring an alignment focused on deep bass and efficiency, rather than simply seeking uncontrolled volume.
Intended Users and Applications
This speaker is aimed at speaker builders, rental companies, installers, and demanding DIY enthusiasts who want to create or upgrade an 18" subwoofer cabinet. It performs well in bass-reflex configurations tuned for reproducing kick drum fundamentals, bass, synths, and electronic music, while still allowing enough extension to facilitate crossover with the tops (depending on filtering and system design).
Thanks to its sensitivity of 97dB (1W/1m), it delivers good acoustic levels with appropriate amplification, and its 8 Ohms impedance facilitates standard PA wiring (depending on the number of drivers per channel and the targeted final impedance).
Design, Power Handling, and Low-Frequency Performance
100mm Voice Coil: Thermal Stability and High-Level Control
The 4.0" (100mm) copper wire voice coil directly contributes to the power handling (2400W AES) and stability during intensive operation. In a subwoofer, the voice coil is heavily stressed: a generous design helps maintain more consistent performance as the system heats up and better withstands long sessions.
Excursion and Suspension: Impact, Depth, and Mechanical Reliability
With an Xmax of 9.0mm, the 18TBX100 is designed to move air and produce physical, solid bass. The triple roll suspension and double silicon spider reinforce mechanical durability, which is especially important for signals rich in sub-bass and at high levels, where repeated large excursions put the moving assembly to the test.
Treated Cone: Field Use and Improved Moisture Resistance
The radial cone receives a waterproof treatment front and back, a real advantage in sound reinforcement: humidity variations, transport, storage, outdoor condensation... All situations where a protected diaphragm helps maintain more consistent behavior and reduces the risk of premature deterioration.
Key Parameters: Tuning, Responsiveness, and Enclosure Integration
The Fs at 34Hz and Qts of 0.35 provide useful indications for enclosure design and the type of alignment targeted. In practice, this profile suits a cabinet tuned for deep bass with a good compromise between extension and power handling. The recommendation of 200 liters with tuning at 34Hz serves as a solid base to achieve a coherent response before fine-tuning according to the goal (impact, extension, number of cabinets, filtering type, limiters, etc.).
Technical specifications
| Rackable | No | Type | Speakers |
| Category | sound reinforcement accessory | ||
| Subwoofer speaker | 18" (46cm) | Voice Coil | 4.0" (100mm) copper wire |
| Power | 2400W AES | Magnet | ferrite |
| Impedance | 8 Ohms | Suspension | triple roll |
| Sensitivity | 97dB (1W/1m) | Cone | radial with waterproof treatment front and back |
| Frequency Response | 35Hz - 1kHz | Spider | double silicon |
| Fs | 34Hz | Total Diameter | 460mm |
| Qts | 0.35 | Height | 209mm |
| Xmax | 9.0mm | Weight | 13.0kg |
Questions frequently asked
Is the B&C Speakers 18 TBX 100 suitable for a bass-reflex cabinet?
A 200-liter enclosure tuned to 34 Hz is recommended for this 18-inch driver. Its Fs of 34 Hz and Qts of 0.35 provide a suitable basis for a deep bass-oriented design.
What amplifier power is required for an 18-inch 2400 W AES subwoofer?
The stated power rating is 2400 W AES at 8 ohms. The amplifier choice should consider the final impedance of the setup, the crossover, and the limiters used.
What excursion does this subwoofer driver offer?
A Xmax of 9.0 mm is specified, combined with a triple-roll suspension and a silicone-coated dual spider. This design is intended for the large excursions typical in bass reproduction. The 100 mm copper voice coil contributes to power handling.
Can this 18-inch driver reproduce very low frequencies?
The stated frequency response ranges from 35 Hz to 1 kHz, with a resonance frequency Fs of 34 Hz. It is therefore suitable for reproducing kick drum fundamentals, bass, and synth bass in a properly tuned enclosure.
What are the dimensions of the B&C 18TBX100?
The overall diameter is 460 mm, height is 209 mm, and weight is 13.0 kg. The radial cone receives a waterproof coating on both its front and back surfaces.




