B&C Speakers Recone Kit for 18PS76 8 Ohms
Estimated Shipping Widget will be displayed here!
Essential Information About the B&C RCK18PS768 Recone Kit
Essential Information About the B&C RCK18PS768 Recone Kit
- Recone kit designed to give a second life to a PA speaker
- Compatibility : intended for the B&C 18PS76
- Nominal impedance : 8 ohms
- Ideal for restoring original performance after wear or damage (tear, damaged voice coil, etc.)
Manufacturer Information
B&C Speakers
------------------------
Safety manager:
MSC Distribution
Email: infos@msc-distribution.com
Address:
Reconing: the "maintenance" solution to extend the life of your 18-inch speaker
The B&C RCK18PS768 fits into the maintenance logic of sound reinforcement systems: rather than replacing the entire speaker, a recone kit allows you to refurbish a compatible model while retaining the frame and magnet. This approach is particularly appreciated in sound reinforcement, where reliability and fleet continuity matter as much as performance.
Who and when to use this B&C kit?
This kit is intended for technicians, service providers, repair workshops, and knowledgeable users wishing to refurbish a B&C 18PS76. It is suitable for both preventive maintenance and repair after overload, bottoming out, or membrane deterioration, to restore stable operation in a subwoofer or PA woofer context.
Compatibility and key points before intervention
The essential point is exact compatibility : this RCK18PS768 is specified as compatible with the B&C 18PS76 and at 8 ohms. For a proper repair, ensure you respect the nominal impedance and speaker reference, and entrust the operation to a properly equipped and experienced person (centering, gluing, mechanical inspection) to avoid any rubbing or misalignment.
Technical specifications
| Rackable | No | Type | Speaker Spare Parts |
| Category | speaker | ||
| Nominal impedance | 8 ohms | Compatible with | B&C 18PS76 |
Questions frequently asked
Is this kit compatible with the B&C 18PS76?
This re-coning kit is stated to be compatible with the B&C 18PS76 loudspeaker.
What is the impedance of the 18PS76 re-coning kit?
The nominal impedance is 8 ohms. The loudspeaker reference and this impedance must match before any work is carried out.
Can the re-coning of a 18PS76 be performed without experience?
The procedure requires proper equipment and experience in centering and gluing. Misalignment can cause mechanical rubbing. Checking the cone's movement is part of the process.
In which cases should the cone of an 18-inch loudspeaker be replaced?
Restoration can be considered after overloading, bottoming out, or cone damage on a B&C 18PS76.
Does the kit allow the 18PS76 magnet to be retained?
The repair preserves the frame and magnet of the compatible loudspeaker, without replacing the entire 18-inch driver.



