RME Babyface Pro FS
Estimated Shipping Widget will be displayed here!
- This item is covered for 3 years
Essential Information About the RME Babyface Pro FS Audio Interface
Essential Information About the RME Babyface Pro FS Audio Interface
- SteadyClock FS derived from the ADI-2 Pro for minimal jitter, a solid stereo image, and reference 24-bit/192 kHz conversion.
- Optimized headphone monitoring: power increased to 90 mW, THD reduced by up to 10 dB, and output impedance of 0.1 ohms to drive in-ear monitors and sensitive headphones noise-free.
- High-gain preamps up to 70 dB, mic S/N ratio at 113.7 dB, and line inputs at 116.3 dB (120 dBA) for clean and dynamic recordings.
- Pro workflow and flexibility: 12 I/O, ADAT/SMUX or optical S/PDIF, MIDI via breakout cable, TotalMix FX, class compliant mode, and USB bus-powered.
Manufacturer Information
RME
https://www.rme-audio.de
info@audioag.com
------------------------
Safety manager:
CSI audiovisuel
Email:
Address:
The Babyface Pro "FS": RME's Icon Upgraded
Four years after the original Babyface Pro, RME takes its best-selling portable interface further. The Babyface Pro FS retains the machined aluminum chassis and elevates the clock and conversion to the "FS" standard. The +19/+4 dBu level switch optimizes the signal-to-noise ratio with sensitive monitors, while the new ADCs reduce conversion latency to 5 samples in AD and 7 in DA, enabling more responsive headphone monitoring without extra power consumption.
Who Is It For? Mobile Creators, Home Studios, and Traveling Engineers
Compact, robust, and USB-powered, this interface targets traveling artists, podcasters, streamers, and demanding sound engineers. RME drivers and TotalMix FX ensure exemplary stability in multitrack recording, low-latency streaming, and stage monitoring on both Mac and PC.
Next-Generation Conversion, Latency, and Monitoring
SteadyClock FS and Sonic Consistency
The "FS" clock maximizes jitter immunity for tight lows, precise transients, and a stable stereo image, including when externally synchronized via optical input. Paired with 24-bit/192 kHz converters, it guarantees consistent and reliable playback.
Versatile Preamps and Refined Inputs
The mic preamps offer up to 70 dB gain with attenuator, overload protection, and 48 V phantom power. The line/instrument inputs on 6.3 mm jacks benefit from an improved S/N ratio of 116.3 dB and an 8 dB reduction in THD, capturing DI, synths, and drum machines with wide dynamic range.
Calibrated Outputs and Controlled Headphone Monitoring
Two XLR outputs and two headphone outputs with dedicated impedances use the same operational amplifiers as the ADI-2 Pro. Increased power (90 mW) and 0.1-ohm impedance ensure clean driving of modern headphones. The +19/+4 dBu switch helps keep faders near 0 dB in TotalMix FX.
Comprehensive Connectivity and Mobile Workflow
Depending on needs, the optical port handles ADAT with SMUX or S/PDIF. MIDI is routed via a breakout cable, class compliant mode allows driverless operation, and standalone functionality with the K-slot secures sessions on the go.
Technical specifications
| Compatibility | PC, Mac | Max resolution | 24-bits |
| Sampling frequency | 192 kHz | Headphone outputs | Yes |
| Maximum resolution | 24 bits / 192 kHz | 3.5 mm headphone outputs | THD improved by up to 10 dB, output impedance lowered to 0.1 ohms |
| Optimized conversion latency | 5 samples AD, 7 samples DA (-6 samples AD vs. previous generation) | Output level switch | +19 / +4 dBu |
| 4 analog inputs | mic inputs on XLR (S/N ratio 113.7 dB) and line/instrument levels on 6.3 mm jack (line S/N ratio 116.3 dB, 120 dBA) | Optical I/O | ADAT (SMUX supported) or S/PDIF |
| Mic inputs | up to 70 dB gain, attenuator, overload protection, 48 V phantom power | Dimensions (W x H x D) | 108 x 35 x 181 mm |
| 4 analog outputs | 2 x XLR and 2 x high/low impedance headphone outputs (90 mW power) | Weight | 680 g |
Customer reviews
What customers say
Summarized and selected by AI from recent customer reviews
Customers praised the exceptional, crystal-clear sound quality and impeccable build. The interface works well with Linux in class compliant mode and delivers surprisingly low latency, even better than previous models. However, the TotalMix software has a steep learning curve and requires effort to master.
Review highlights
- “The sound is exceptional and crystalline. Latency is better than my previous model.”
- “Sound is clear and precise, quality is impeccable.”
- “A guarantee of quality.”
Based on 5 reviews
- 5 stars, 5 reviews
- 4 stars, 0 reviews
- 3 stars, 0 reviews
- 2 stars, 0 reviews
- 1 star, 0 reviews
The review form didn't open. Please try again.
Customer photos
-
User on Linux (Debian Trixy/Sid - updated in March 2024 at the time I am writing this review), I can say that it works well in class compliant, with Pipewire (and qpwgraph) to make the connections. ------ The sound is perfect.
------
On the other hand, there are small things to do to switch to Class compliant. The Linux-Mao site explains in French the small things to do for Babyface Pro to be used in this class compliant mode.
------
At first, the use is not entirely intuitive, but there are videos that explain how to use the card with Class Compliant mode. It's easy to find with a good search engine. But you have to speak English.
------
On the other hand, I do not know if it is possible to use the sound management software offered with this card under Linux. There is no Linux version anyway. I don't know if Wine could work. But when you choose to use Linux for computer music, you know that the software part is complicated...Automatically translated
-
First of all, I want to congratulate Woodbrass for their services and the speed of order processing. Ordered on Wednesday, received on Friday morning...
I was already using an RME product, the Hdsp 9632 in PCI format, I was always hampered to switch to a model with a USB connection because I was afraid of higher latencies.
Impressions after 2 evenings of testing, very impressed by the sound which is exceptional and crystalline. Latency level, to my surprise, it's better for the moment than with my Hdsp 9632.
In conclusion, I am completely satisfied with my new RME card, which is well worth the €700 invested.
Franck.D.Automatically translated
-
First of all, I want to congratulate Woodbrass for their services and the speed of order processing. Ordered on Wednesday, received on Friday morning...
I was already using an RME product, the Hdsp 9632 in PCI format, I was always hampered to switch to a model with a USB connection because I was afraid of higher latencies.
Impressions after 2 evenings of testing, very impressed by the sound which is exceptional and crystalline. Latency level, to my surprise, it's better for the moment than with my Hdsp 9632.
In conclusion, I am completely satisfied with my new RME card, which is well worth the 700 invested.
Franck.D.Automatically translated
-
Perfectly corresponding to my expectations, the sound is clear and precise, the quality is impeccable, just total mix software difficult to handle but powerful once mastered.
Automatically translated
-
RME, a guarantee of quality
Automatically translated
No reviews match this filter.
Reviews can't be loaded right now. Please try again.
Automatically translated
Questions frequently asked
Is the RME Babyface Pro FS compatible with Mac and PC?
Compatibility covers both PC and Mac computers, with RME drivers and the TotalMix FX software. The class compliant mode also allows driver-free operation.
How many microphone and instrument inputs are available?
The 4 analog inputs include microphone inputs on XLR and line/instrument inputs on 6.3 mm jack. The mic preamps provide up to 70 dB of gain. A 48 V phantom power supply, a pad, and overload protection are integrated.
Are the Babyface Pro FS headphone outputs suitable for different headphones?
Two headphone outputs with dedicated impedances deliver up to 90 mW, with an output impedance of 0.1 ohm.
Can the Babyface Pro FS be expanded via ADAT?
The optical input/output supports ADAT with SMUX or S/PDIF. External sync via the optical port benefits from the SteadyClock FS clock.
Is the Babyface Pro FS practical for mobile recording?
With dimensions of 108 x 35 x 181 mm and a weight of 680 g, this interface is easy to transport. USB power and the K-slot meet the needs of mobile sessions.




