Woodbrass DXPRO12 - BSTOCK

A PA loudspeaker designed for every event

The Woodbrass DXPRO12 is a 12-inch active loudspeaker designed to meet the varied needs of modern sound reinforcement. Its versatile format makes it suitable for music playback at a DJ party, concert or reception, while also making it a practical choice for speech at conferences, group classes or presentations.

Thanks to its Class-D amplification, 30.48 cm loudspeaker and compression driver, it combines low-end impact, vocal clarity and high-frequency presence. This Stock B version retains all the model’s sonic and functional qualities, with cosmetic marks related to its condition: a grille dented in the lower-left section and numerous scratches.

For DJs, musicians, entertainers and versatile installations

The DXPRO12 is aimed at mobile DJs, bands, singers, entertainers, associations, multipurpose venues and event professionals looking for an active loudspeaker that is easy to set up and use. Its settings, accessible from the LCD screen, make it easy to quickly adapt the sound for a dance floor, stage, ceremony or speech.

It can be mounted on a stand to project sound towards the audience, with either a straight pole mount or a 5% angled pole mount for more precise sound direction. Its 45-degree angled cabinet also allows it to be used on the floor as a stage monitor for musicians and live performers.

DSP, wireless playback and comprehensive connectivity

The onboard DSP processor provides direct control over the master level, treble, midrange, bass and Delay. Four audio modes are available: Normal for versatile use, Speech to prioritize vocal intelligibility, Live for stage performances and DJ to enhance the energy of amplified music. Two position presets, Normal and Monitor, also optimize the loudspeaker’s performance according to its placement.

The DXPRO12 features two balanced XLR/jack combo inputs with a microphone or line selector and separate level control. A 3.5 mm mini-jack auxiliary input makes it easy to connect a mobile source. The balanced line-level XLR output makes it easy to send the signal to a second loudspeaker or to a more extensive sound reinforcement system.

Its wireless receiver enables music playback from a compatible device. Stereo pairing and TWS mode allow two DXPRO12 units to be linked from a single source, with an operating distance of up to 10 metres between the loudspeakers. To extend the system in the low frequencies, the HPF SUB high-pass filter can be activated when adding a subwoofer.

Technical specifications

Type	2-way active loudspeaker	Dispersion	90 degrees horizontal x 60 degrees vertical
Amplification	Class-D	Audio modes	Normal, Speech, Live and DJ
RMS power	450 W	Position presets	Normal and Monitor
Power distribution	300 W low frequencies + 150 W high frequencies	HPF SUB high-pass filter	enabled or disabled
Peak power	1000 W	Display	backlit LCD screen
Woofer	12 inches, or 30.48 cm	DSP settings	level, treble, midrange, bass and Delay
Loudspeaker voice coil	3 inches, or 7.62 cm	Receiver	wireless
Loudspeaker impedance	4 ohms	Inputs	2 balanced XLR/jack combo inputs
Compression driver	1 inch, or 2.54 cm	Auxiliary input	3.5 mm mini-jack
Compression driver impedance	6 ohms	Output	balanced XLR line-level
Frequency response	40 Hz to 19 kHz	Front-panel LED	ON, OFF or LIMIT
Maximum sound pressure level	118 dB